• The power inverter is now ready for use.
CAUTION!
If you are going to disconnect the battery, switch the power inverter off first (Switching
on/off).
CAUTION!
Always disconnect the power cables from the vehicle battery when you are not using the
device.
Switching on/off
• Be sure to have your power inverter properly placed and connected according to the
wattage that is to be connected before attempting to switch it on.
• Switch the battery on in case it is switched off.
• Set the on/off switch (H) to the "I" position to switch on the power inverter.
The green indicator (F) lights up, indicating that the power inverter is operating
normally and that the AC outlet and the USB port are powered.
• Plug in the devices that you want to operate to either the AC outlet or the USB port.
CAUTION!
After plugging in the devices, turn them on
ONE AT A TIME
. This will ensure that the
power inverter does not have to deliver the surge currents required for all the loads at once.
• Set the on/off switch (H) to the "0" position to switch off the power inverter.
CAUTION!
Switch the power inverter off and disconnect it from the power source when it is not in
use.
IMPORTANT!
When the power inverter is switched off, it draws no current from the battery. When the
power inverter is switched on without any load connected to it, the power inverter
draws approx. 0.3 A from the battery.
This low current draw will eventually discharge the battery.
Using the USB port
Plug the USB-powered device into the power inverter’s USB port (D) and
operate normally.
IMPORTANT!
This unit’s USB charging port does not support data communication. It only provides (5 V / 2.1 A)
DC power to an external USB-powered device. Not all mobile phones are provided with a
charging cable. Data cables are not supported by this device. Please check with your mobile
phone dealer for the correct charging cable.
22
model no. 011-1870-6 | contact us: 1-877-466-8191
23
OPERATION
OPERATION
