TM/MC
3
IMPORTANT
NOTE
Don’t pre-set pressure during operating, otherwise it will stop operating.
Always start your vehicle engine when operating the compressor.
Inflating tires
1. The product records latest pre-set pressure. For example, if your pre-set
pressure gauge is 45 PSI, the product records the pre-set pressure at 40 PSI the
next time.
2. Before reaching desired pressure, the compressor can be shut off manually by
moving the compressor switch to ‘O’ position.
INFL
ATING TIRES
1
Connect the coiled air hose to the compressor by pulling back on the quick-connect
coupler collar and inserting this on valve located on the end of rubber air hose. Push
in firmly and pull the quick-connect coupler back until you hear
a click to lock the
coiled air hose in place.
Connect the 12 V power cord clips to your vehicle battery by connecting the red
positive (+) clip to the vehicle’s positive batter
y terminal first
. Next connect the
black negative (-) clip to vehicle’s negative battery terminal.
Adjust to your desired pressure (refer to Pressure Pre-set).
Connect the screw-on valve connector to tire air valve by twisting clockwise until it
is securely attached to the tire air valve.
Move the compressor switch to ‘I’ position and the compressor will begin to
operate. The compressor will automatically shut off once the pre-set pressure is
reached.
Move the light switch to ‘I’ position for visibility in the dark. Move the light switch to
‘O’ position to turn light off.
To remove the air hose from your tire air valve, twist the screw-on valve connector
counter-clockwise.
Remove the 12 V power cord clips from the vehicle’s battery terminals.
Remove the coiled air hose from the compressor by pulling back on the
quick-connect collar and pulling away from the valve located on the end of rubber
air hose.
Return 12 V compressor to the carry case.
2
3
4
5
6
7
8
9
10
