Model no. 009-5032-6 / Contact us 1-888-942-6686
2
WARNING
W
ARNING
Please carefully read the manual included with this product. Misuse of the unit could cause
property/equipment damage and/or personal injury.
6
5
1
2
3
4
OPERATION
This product is equipped with a Programmable Digital Pressure Gauge. The digital gauge
can be used to monitor air pressure when inflating your desired objects and can
automatically shut off once pre-set desired pressure is reached.
Pressure Pre-set
The pre-set pressure is factory set at 45 PSI when manufactured.
Do not overinfl
ate products beyond manufacturers’ recommendations.
Do not allow the compressor or its components to get wet.
Do not leave the air compressor unattended while in operation.
Do not allow children to handle or operate this compressor.
Do not use this product for other than its intended use.
Do not disassemble or tamper with this compressor.
Inspect air compressor before use. If cracked, broken or damaged parts are found,
qualified technicians should repair dam
aged parts.
Never expose the air compressor to rain, frost or temperatures above 30°C (86°F) or
temperatures below -30°C (-22°F).
Never use on people or animals.
Make sure the cord is not exposed to hot objects, oil or sharp edges.
WARNING! For your own safety,
you should only use accessories and parts specified in the
instructions, or recommended for use by the manufacturer.
11
9
10
7
8
3
1
2
Press button ‘set’ for 3 seconds to check the pre-set pressure. The pre-set pressure is set
at 45 PSI when manufactured.
Adjust your desired pressure by pressing button ‘
▲
’/ ‘
▼
’. Press button ‘
▲
’ to increase
the pressure gauge and press button ‘
▼
’ to decrease the pressure gauge. Once the
desired pressure is reached,
the displayed figure will flicker for several times
, then return
to 0.0 PSI. That means the pressure is pre-set successfully. The product is ready for
infl
ating.
Press button ‘set’ to display pressure in PSI/BAR.
