Page 17
Using your S1 PRO
The S1 PRO is extremely simple to control. There is one main button that is used to turn the trolley on and off, whilst also
controlling the speed of the trolley. The speed can be
adjusted while the trolley is stationary or in motion.
The trolley has 9 speed settings (1 to 9) with 1 being
the slowest setting and 9 the fastest. To increase
the speed, rotate the speed dial clockwise, or anti-
clockwise to decrease the speed.
To start the trolley, simply select your required
speed setting and press the button. The trolley will
smoothly accelerate until it reaches the selected
speed. To stop the trolley, simply press the button
again - there is no need to reduce the speed setting.
Power and Battery Level
There are two indicating LEDs below the speed
display. The right hand LED displays the battery
capacity (green, amber & red) and will illuminate as
soon as the battery is plugged in. The left hand LED will illuminate when the power is on.
The trolley is designed to protect your battery from being fully discharged, should your battery capacity drop too low the
trolley will cut the power to the motor. If this should happen you will see “b” flashing on screen.
Using your S1 PRO / Power and Battery Level
