Moto Parilla – CARBON SUV E-BIKE
Resolution
: Check if Bowden cables are well fixed in the gear shift. If tightened and they
move means Bowden cable is broken. Pls change Bowden cable following NUVINCI
instruction.
8.3 speed Sensor doesn’t work
To check the sensors:
1)
Turn on the battery
2)
Turn on the display
3)
Rotate the rear wheel until the permanent magnet on spokes engage the sensor area
4)
If sensor is in right place, one red LED on sensor will light
5)
If no red LED on, adjust the position of permanent magnet on spoke or/and the
position of sensor.
8.4 switch brake Sensor doesn’t work
To check the switch brake sensor:
Advice: This operation should be performed on a private road or on a road with no traffic
and performed at slow speed
1)
Turn on the battery
2)
Turn on the display
3)
Start to pedal until the motor will not start to help the rider
4)
Put low pressure on right lever and simultaneously continue to pedal: the motor has
to stop working
5)
Put low pressure on left lever and simultaneously continue to pedal: the motor has to
stop working
6)
If in point 5 operation or/and point 6 operation the motor does not stop working,
please check the connector
7)
If connector is connected, please contact
9 CONTACT INFORMATION
CARBON SUV E-BIKE is a product of MOTO PARILLA, a UK-registered company.
For any question check
www.motoparilla.it
