Moto Parilla – CARBON SUV E-BIKE
2)
Extract the battery using the handle and disconnect the cable form motor
3)
Connect the battery charger to the electric line AC/DC (220V in EU, 110V in USA) and
the light on battery charger become green
IMPORTANT ADVICE! Check that the electric AC/Dc line is equipped with all the safety device
and that the line has a neutral wire well connected with earth.
4)
Connect the battery charger to battery and the led on battery charger become red
and led on battery become green
5)
When the battery is charged also the led on battery charger turn on green color.
6)
Disconnect battery from battery charger
7)
Disconnect battery charger from eclectic AC/DC line
IMPORTANT ADVICE! DO NOT LEAVE THE BATTERY ON CHARGE FOR MORE THAN 12 HOURS.
NOTICE: With the battery fully charged and the charger disconnected, turn the battery off by
placing it into OFF Mode. See section 5.2.4 Returning the Battery to OFF Mode for more
information.
5.2.2 Battery ON Mode
The battery must be in
ON Mode
before you can use your CARBON SUV E-BIKE
.
For protect the battery the battery will switch-off itself automatically after about 60 minute
of stand-by, so you must make this operation before to ride the bike.
1)
Open the battery door
2)
Press the button until the LEDs begin to flash
