Motion CM-34, Руководство пользователя

Страница: 18 / 68

7
7.1
Shortly
press the program
button
on the smart switch. The blind will start stepping and the LED on the
smart switch will start blinking, indicating that program mode has been activated.(The blind remains
stepping until the program mode is de-activated.)
It is possible to only delete end limits or to do a factory reset.Factory reset will delete
the end limits and remove the connection to any paired remote.
Delete end limits: To delete the end limits of the blind hold the program button until the blind stops
stepping for the first time, keep holding the button until the blind stops stepping for the second time.
(approximately 10 seconds)
Factory reset: To reset the blind to factory defaults hold the button for at least 20 seconds.The blind
will stop stepping twice. After the second stop the blind will give one extra step to confirm factory
reset.
Reset the blind
18