Motion CM-34, Руководство пользователя

Страница: 11 / 68

2
2.1
2.2
Shortly press the program button on the smart switch. The blind will start
stepping and the LED on the smart switch will start blinking, indicating that
program mode has been activated.(The blind remains stepping until the program
mode is de-activated.)
Repeat steps 2.1 - 2.2 to remove a blind from a channel.
Press the pair button on the back of the remote control to pair the blind to the
selected channel.The blind will shortly stop stepping indicating that the remote
has been paired to the blind.
Pair a remote
For the following steps the power grid shoud be turned on. It is recommended to
first program the end limits of your wired motor before programming the smart
switch. Please see the manual of your motor how to program the end limits.
(Max. 10 remotes can be paired to the switch.)
Pair
button
Before installing the smart switch ensure that the grid is turned off (turned
down breakers). Connect the smart switch with the power grid according the
schedule below. (The cables can be inserted without pressing the buttons.)
11