Motion Composites MOVE Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

Motion Composites MOVE Скачать руководство пользователя страница 6

T

(450) 588-6555 - 1 866 650-6555

F

(450) 588-0200

[email protected]

6

5.

Technical Specifications

5.1

Structure

Frame

Folding with aluminum cross brace

Material

aluminum alloy

Weight

19 lbs (8.61 kg)

(w/o rear wheels & footrest)

Weight capacity

250 lb (113.3 kg)

Kit HD : 350 lb (158.7 kg)

5.2

Dimensions

Width

14’’ (35.5 cm)

to 16’’, 18, 20’’ & 22’’ (55.8 cm)

Depth

16’’ (40.6 cm)

to 18” & 20’’ (50.7 cm)

Front seat-to-floor height

13’’ (33.0 cm) to 20

1/4

’’ (52.7 cm)

Rear seat-to-floor height

12

1/2

’’ (31.7 cm) to 20’’ (50.7 cm)

5.3

Adjustability

Upholstery

Tension adjustable or bolt on

Back height

16” (40.6 cm) or 20” (50.7 cm)

Adjustable angle

from 70° to 110°

Footrest

Swing out

Camber 0°

Centre

of gravity

from 1

1/4

” (3.2 cm) to 2

1/4

” (5.7

cm) + amputee axle plate option

6.

Safety

6.1

Periodic Checklist

See related appendix (section 14).

6.2

Weight Limitation

The MOVE wheelchair has a weight limit of 250 lbs (or 350 lbs
with an HD kit). The specified weight capacity includes: both
the rider and any luggage. A user with a 10 lbs backpack, for
example, should not exceed a weight of 240 lbs (or 340 lbs with
the HD kit). It is of utmost importance that the total weight be
below the above specified capacity.
The wheelchair is designed to support only one person. Please
do not stand up on the footrests.
Motion Composites is not responsible for any damages or
injuries caused by the misuse of this wheelchair.

6.3

Weight Training and Sporting Activities

This wheelchair was not designed or tested as a weight training
or stretching apparatus. Do not attempt to use this wheelchair
for weight training or stretching exercises. The warranty shall
be void if the wheelchair has been used for any weight training
or stretching purposes.
This wheelchair is not intended to be used during sporting
activities.

Should you make any adjustments, repairs or do any
servicing, ensure that all fasteners are tightly secured
before use.

Exceeding the specified weight limit could damage the
wheelchair and/or cause severe injuries.

This wheelchair was designed to be tailored to the
dimensions of its owner and as such should only be
used by its owner unless a qualified specialist,
approved by Motion Composites, has readjusted it.

7.

Tutorial

To find the latest tutorial or information, please find our contact
team at:
http://www.motioncomposites.com/en/team/

«
...
4
5
6
7
8
...
»

Содержание MOVE

























Отзывы:

Нет отзывов