Motion Composites MOVE Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 24

Motion Composites MOVE Скачать руководство пользователя страница 16

T

(450) 588-6555 - 1 866 650-6555

F

(450) 588-0200

[email protected]

16

10.11.3

Adjusting the rear axle height

Fig. 25

1

2

3

• Remove the nut (3) holding the axle

bushing.

• Move axle bushing (1) (Fig. 25) along

mounting plate (2).

• Reinstall the bushing in the desired

mounting hole and tighten the nut
(3).

The seat height, seat depth,
back angle, seating system/
upholstery, size/position of the
rear wheels, size/position of
the front casters, as well as
the user condition directly
relate to the stability of the
wheelchair. Any change to one
or any combination of the nine
may cause the wheelchair to decrease in stability.
These adjustments must be performed by a qualified
technician. Seat-to-floor heights have specific positions
depending on rear wheel size, rear wheel position, front
caster size/position and seat-to-floor angle. These
adjustments MUST be performed by a qualified
technician

10.11.4

Adjusting rear wheel spacing

The rear wheels can be adjusted
laterally by repositioning axle bushing
(1) (Fig. 26) on mounting plate (2).

• Loosen nuts (3) on the axle bushing

(1).

• Turn the bushing (1) in the desired

direction to adjust the spacing.

• Firmly tighten the nuts (3).

Fig. 26

10.12

Wheel Locks

10.12.1

Replacing/Adjusting the Wheel Locks

• Loosen screws (1) (Fig. 27).
• Slide the wheel lock to the desired

position.

• Tighten screws (1) to a snug fit.

Final tightening should be done
manually.

• Once engaged, the wheel lock

should embed 1/8 “ (3 mm) into
the tire.

Fig. 27

10.13

Lock Extensions

10.13.1

Replacing/Adjusting the wheel lock

extensions

• Loosen screw (1) (Fig. 28).
• Align eyelet (2) with the mounting

hole.

• Re-tighten screw (1) on the Lock

lever.

Fig. 28

«
...
14
15
16
17
18
...
»

Содержание MOVE

























Отзывы:

Нет отзывов