background image

5

may cause harmful interference to radio 

communications. However, there is no 

guarantee that interference will not occur 

in a particular installation.

 

Turn the device off and refrain from 

using the device in places where wireless 

communication is not allowed (e.g. 

airplanes, hospitals). 

 

The magnetic fields generated by the 

device could affect pacemakers and 

implanted defibrillators. Therefore make 

sure there is a distance of at least 10 cm 

between the device and the pacemaker/

defibrillator.

 

Make sure that children do not play with 

the plastic wrapping. They may get caught 

in it when playing and suffocate.

 

The device contains small parts which 

may be a choking hazard. Not suitable for 

children under age 3.

 

Children must not play with the device.

NOTICE! Risk of damage!

 

Never disassemble or modify the device. 

 

Do not open the housing; instead, have 

a qualified professional perform repairs. 

Contact a qualified workshop for this. 

Liability and warranty claims are waived 

in the event of repairs performed by the 

user, improper connection or incorrect 

operation.

 

If the device is damaged, the 

manufacturer, its customer service or a 

person with similar qualifications must 

replace it to avoid risks.

 

Only parts that comply with the original 

device data may be used for repairs. This 

device contains electrical and mechanical 

parts which are essential for providing 

protection against sources of danger.

 

Only charge the device with the provided 

or a compatible USB cable. 

 

Do not use the device when charging. 

 

Check the device for external visible 

damage before you use it. Do not operate 

device if it is damaged.

 

Do not drop or sit on the device. 

 

Do not immerse the device in water or 

other liquids.

 

Store the device in a clean, dust-free 

environment.

 

Do not use any aggressive cleaners, 

brushes with metal or nylon bristles or 

sharp or metallic cleaning utensils such 

as knives, hard scrapers and similar items. 

They could damage the surfaces.

 

Never submerge the device in water or 

other liquids.

 

Make sure that no water or other liquids 

penetrate the housing.

Содержание MPlus


















Отзывы: