background image

14

7.13  Hybrid Dynamic Noise 

Cancellation system

Hybrid Dynamic Noise Cancellation (HDNC

TM

) consists of 5 

levels (1–5). Level 1 is the default level. 

•  Press 

HDNC

 to cycle through the levels. Press the 

button once to go one level up or twice successively to 

go one level down.

Active Noise Cancellation levels
Level 1: Ultimate noice cancelling level
Level 2: Medium noise cancelling level
Level 3: Mild noise cancelling level
Level 4: Natural surrounding sound level
Level 5: Talk through level
You can still listen to music and hear your own 

voice in all levels.

7.14  Talk through mode

Talk through mode allows you to hear ambient sound 

even while using the device. In talk through mode, you 

cannot make or answer phone calls, listen to music or have 

intercom conversation.  

•  Turn 

VOL

 anticlockwise and hold for 2 seconds to turn 

on talk through mode.

VOL

•  Turn 

VOL

 anticlockwise and then release to turn off 

talk through mode.

VOL

7.15  Resetting to factory default

1. While the device is powered on, press 

HDNC

 for 

8 seconds and release the button when you hear the 

voice prompt “Factory reset”.

2. Press 

MFB

 button to confirm the factory reset.

7.16  More product information

Visit www.motikom.com for more information.

8.  LED lights

The connection and operation status can be easily checked 

through the colours and patterns of the LED lights [

4

] on 

the device. Refer to the table below.

Colour and pattern Status

Flashing blue once 

intermittently

Powered on without any devices 

connected.

Flashing blue twice 

intermittently

Powered on with device 

connected.

Flashing red 

intermittently

Battery level is low.

Left LED light 

flashing red

Intercom pairing is in progress.

Flashing red and 

blue

Bluetooth pairing with mobile 

phone is in progress.

Solid red

Charging is in progress

Flashing red and 

blue alternately

Factory reset is requested.

9.  Cleaning

•  Wipe the device off with a damp cloth. Then let all 

parts dry completely.

•  For the best acoustic performance, regularly clean the 

ear tips with a dry and soft brush. 

Содержание MPlus


















Отзывы: