Motic Panthera C, Руководство по эксплуатации

Страница: 33 / 46

32
6.11 Illumination brightness adjustment
6.11.1 Panthera S / E / C:
To adjust the Brightness turn the Light Intensity Control Knob and observe the brightness change until
the desired brightness has been reached.
There is no Standby or sleep mode available in this model
6.11.2 Panthera U / L / HD:
To adjust the Brightness, turn the Light Intensity Control Knob and observe the brightness change until
the desired brightness has been reached.
If the Illumination has not been changed for 3s the actual value will be stored for this Objective
magnification.
The light value stored is independently for each objective lens and will be automatically restored once
the user returns to the objective lens.
(Fig.14-1) (Fig.14-2)
6.12 Restore factory default for intensity (For Panthera U / L / HD only)
● Turn the Instrument off by switching the main switch on the backside of the Instrument.
Keep the intensity knob pressed and switch instrument on.
Keep holding the intensity control knob for 10s.
Now system is being reset to factory values.
Default intensity value for each objective is chosen to 10% of total brightness