Motic Panthera C, Руководство по эксплуатации

Страница: 42 / 46

41
11.SELECTION OF THE POWER SUPPLY CORD
Motic Instruments are certified and tested for safety and environmental conformity. Only power supply
cords which are conform with below listed certification marks and countries are applicable.
CAUTION : Do not use non-approved power cord for Motic products, Motic can no longer
warrant the electrical safety of the equipment.
Table 1 Certified Cord
Specifications
Voltage Rating 125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
Current Rating 6A minimum
Temperature Rating 60 C minimum
Length 3.05 m maximum
Fitting Configuration
Grounding type attachment pull cap Opposite terminates in molded-on
EC con-figuration appliance coupling.
The power supply cord should be certified by one of the agencies listed in Table 1, or comprised of
cordage marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be
marked with at least one of agencies listed in Table 1..