Motic AE2000 BIN, Инструкция по эксплуатации

Страница: 19 / 27

18
5. Changing between Halogen and LED illumination
y
Attention:
Unplug the plug-in power unit from the microscope to avoid any risk of electric shock. Before
replacing the bulb/changing to LED please wait for a sufficient cool-down time of the bulb.
y
Press down lightly the lamp house cover and rotate it counter clockwise for removal. (Fig.21)
(Fig.21)
y
Remove the bulb from the socket pinholes.
Halogen bulb (Fig.22) LED (Fig.23)
y
Installing the new bulb into the socket pinholes, until it reaches the limited, be careful not to tilt it
when mounting.
y
If installing the halogen bulb, do not touch the glass surface of the lamp with bare fingers. Doing so
will cause fingerprints, grease, etc., to burn onto the lamp surface, reducing the illumination
provided by the bulb. If surface is contaminated, wipe it clean using lens or soft cotton.
y
Return lamphouse cover to original position and rotate clockwise to lock into place. The white paint
marked on the cover should face the user.
y
The halogen bulb holder can be used also for the LED module without modification.