Motic 1100201300082, Инструкция по эксплуатации

Страница: 9 / 18

8
4. KNOWING YOUR MICROSCOPE
4.1 Stereo Body with Binocular or Trinocular Head
For the SMZ-161 stereomicroscopes, the binocular or trinocular tubes are built into the stereo body to
form a single unit called a “Stereo-head” . The SMZ-161 B (Fig.1) is equipped with a binocular tube
while the SMZ-161 T (Fig.2) is equipped with a trinocular tube.
4.1.1 Stereo Body
●
The Stereo body is the key component of the microscope. It includes the Greenough stereo-zoom
system with a continuous zoom range of 6:1. It also includes separate left and right non-telescopic
optics systems.
●
With this system, users are able to enjoy excellent depth of field and stereo effects. With the help of
precision optics from Motic , perfect parfocality is maintained throughout the entire zoom range.
●
The zoom knobs are located on both sides of the microscope and scales are printed on the knobs to
display the current magnification. Adjust these knobs to change the magnification of the image. If the
microscope has been properly adjusted, the image should remain in focus even when the
magnification is changed (parfocal). For adjustment procedures, refer to section 3.2 of this manual.
●
The stereo body is mounted onto the circular mount of the head holder and is locked into place
using the locking screw on the right hand side of the holder. While operating the microscope, this
locking screw should always be locked to maintain utmost stability.
4.1.2 Binocular tube for the SMZ-161B
●
The interpupillary distance can be adjusted by moving the two eyepiece tubes horizontally. For
proper interpupillary distance adjustment, refer to section 3.1 of this manual.
●
The eyepiece can be secured in the eyepiece tube using a small screw. This is important for easy
adjustment of the eyepiece diopter.
4.1.3 Trinocular tube for the SMZ-161T
●
The procedures for adjusting the interpupillary distance and securing the eyepieces are the same for
the trinocular tube as they are for the binocular tube.
●
By turning the knob at the left side of the trinocular tube, all the light from the right eyepiece tube will
be deflected into the phototube for the attached imaging device.
●
At the top of the trinocular tube, there is a locking screw that is used to secure the adapter for the
imaging device. After fitting the adapter, this locking screw should be tightened.