Motic 1100103800158, Инструкция по эксплуатации, Страница: 15 / 30

14
3.3 Installing the Objectives

Hold an objective and screw it in the nosepiece
thread hole till its limited position gradually then
revolve the nosepiece in clockwise direction.

install the next objective in blank thread hole as
needs, following the above approach. (Fig.7)
Caution:
to guarantee the precision please use even
force to screw objective in thread holes, any
violation may influence the quality of imaging and
illumination of microscope negatively.
(Fig.7)
3.4 Inserting the Eyepieces

Remove the dust caps from one eyepiece tube.

Spirally Insert one eyepiece into the eyepiece sleeve till its limited position. (Fig.8-1)

Install the next eyepiece as above approach.

install the rubber eye guards. (Fig.8-2)
(Fig.8-1) (Fig.8-2)