Motic 1100103800158, Инструкция по эксплуатации, Страница: 12 / 30

11
100W Halogen

The applicable halogen bulbs are the 12V 100W HAL high-intensity bulb.
(Osram, model: 64625 HLX)

In order to prevent electric shock always turn the power switch off and unplug the power cord
before installing or replacing the lamp.

Loosen the lamp housing cover clamp screw (Fig.4-1) and remove the cover (Fig.4-2).

When installing the bulb, do not touch the glass surface of the bulb with bare fingers. (Fig.4-4)
Doing so will cause fingerprints, grease, etc., to burn onto the bulb surface, reducing the
illumination provided by the bulb. If the surface is contaminated, wipe it clean using lens tissue.

Firmly insert the bulb into the socket pinholes until it reaches the limit. Be careful not to tilt the bulb
when mounting. (Fig.4-5)

Close the cover and secure with it with lamp housing cover clamp screw. (Fig.4-6)
Fig.4-1 Fig.4-2
Fig.4-3 Fig.4-4