Instruction Manual & User Guide
#13392
-MC-Floyd Shopping Buggy-
03-12
5
TO UNFOLD THE STROLLER
• If the stroller has a security tie, please remove it.
•
Remove shipping brace before assembly (
A
),
as per
Figure 1.
• Lift the handle upwards away from the front legs,
as per
Figure 1.
• Continue this action until the frame is fully open.
Assembling: Floyd shopping buggy
Figure 2
Figure 1
Figure 3
When you hear a ‘click’ the stroller is fully opened and locked.
A
TO LOWER THE FOOTREST
• Press down on the footrest until it snaps onto the
cross bar, as per
Figure 2.
TO ASSEMBLE THE REAR WHEELS
• Remove the cotter pin (
A
) and one washer (
B
) from the axle leaving one washer (
C
)
remaining on the axle.
• With the spokes facing out, slide a wheel (
D
) onto the axle, followed by the remaining
washer (
B
), finally insert the cotter pin (
A
), into the axle, as per
Figure 3.
• Insert the straight side of the cotter pin through the hole in the axle, as per
Figure 4.
• Snap hub cap onto wheel, as per
Figure 5.
• Repeat steps to attach other wheel.
Figure 4
Figure 5
