mothercare Nixi Pushchair, Руководство пользователя, Страница: 9 / 10

17 16
7. Removing and refitting the covers and harness, continued
Birth to 15kg (approx. 4 years)
To remove the apron
Unfasten the hook and loop strips on
both sides of the seat
(dia 14f)
then
pull the apron off (dia 14g) .
Removing the main chassis cover
Unthread the underside cover straps
(dia 14h) .
Unhook the cover from under the calf
support by pulling up in the direction
shown
(dia 14i) .
The chassis cover can now be lifted
from the pushchair frame
(dia 14j and
14k)
and the harness released from
the chassis cover.
To refit all the covers, simply reverse
the above instructions.
7. Removing and refitting the covers and harness
Birth to 15kg (approx. 4 years)
Unfolding the armrest pads
To unfold the armrest pads, pull down on the fabric on the outer side
and fold into the centre of the pushchair
(dia 14a) .
Removing the bumper bar cover
To remove the bumper bar cover, simply unzip the bumper bar cover
and remove from the plastic moulding
(dia 14b) .
Removing the shopping basket
Unfasten the press studs straps
located at the rear
(dia 14c) and the
front (dia 14d) of the shopping basket.
Attaching the shopping basket
Thread the front press stud straps
through the metal loops attached
to the front of the frame, then press
studs together
(dia 14c) .
Thread the rear press stud straps
over the round tube and around the
rear legs, then press studs together
(dia 14d)
.
Removing the hood
Pull the hood clips off the bars located just above the armrest
(dia 14e)
.
GB
Re-threading the underside chassis
cover straps
Place the pushchair on it’s side to gain
better access to the underside cover
straps.
Thread the loose end of the strap
through both D-rings
(dia 14l) . Thread
the strap back over the last D-ring and
back through the first D-ring
(dia 14m)
.
Pull the strap tight.
14l 14m
14a
14b
14c
14d
14e
14f 14g
14h 14i
14j 14k