mothercare Nixi Pushchair, Руководство пользователя, Страница: 5 / 10

9 8
Unfolding the pushchair
Holding the pushchair in a vertical
position, lift up on the frame lock
release latches
(dia 2a)
.
Push down on the foot lock with your
foot whilst pulling both handles up
firmly, opening the pushchair until the
chassis locks into the open position
(dia 2b) . Ensure the frame locking latch
has locked on both sides.
Fitting and removal of the front swivel
wheels
Take each of the front swivel wheel
assemblies and press them down onto
each of the front legs. You will hear a
“click” when they are locked into place
(dia 1a) .
If you need to remove a front swivel
wheel, press the wheel release lever
(dia 1b) located on the underside of
the wheel and lift the wheel assembly
from the front leg.
Fitting and using the bumper bar
Whilst pressing the button on the
bottom of the bumper bar, slide one
side of the bar into the armrest socket
in the position shown
(dia 3a) . Repeat
this sequence for the other side.
To release the bumper bar, push in
button and release
(dia 3b) .
2. Using the functions of your pushchair
Birth to 15kg (approx. 4 years)
Extending and retracting the handles
To extend each of the pushchair
handles, press the button located at
the top of each handle inwards
(dia 4a),
pull the handles towards you
to extend
(dia 4b)
.
1. Assembling your pushchair
Birth to 15kg (approx. 4 years)
GB
1a 1b
2a 2b
3a 3b
4a
4b
To adjust the calf support
Lower the calf support by lifting up the
release latches located underneath
both sides of the calf support
(dia 6a)
and push the calf support down.
Raise the calf support by lifting it until
the release latches lock into place
(dia 6b) .
Adjusting the backrest
Squeeze clips towards each other to
release the backrest lock
(dia 5a)
.
Move the backrest into the desired
position
(dia 5b) .
5a 5b
6a 6b