mothercare Nixi Pushchair, Руководство пользователя, Страница: 6 / 10

11
10
Folding your pushchair
Lock the front wheels. Position the seat in the front-facing full upright position. Lift up on the lock release
latches
(dia 9a) . Lift up the lower framework with your foot then pull up on the folding handle to fold the
frame
(dia 9b)
.
Hold pushchair vertically and push down on the handles until the latches lock on both sides (you will hear
a click)
(dia 9c)
.
2. Using the functions of your pushchair, continued
Birth to 15kg (approx. 4 years)
Insert the liner in the position shown (dia 10g) . The D-rings can be used
to attach your own harness, and can be accessed through the slots in
the slots in the liner.
Fitting and removing the liner
Raise head enclosure
(dia 10e)
,
unfasten the harness and move
them away to the side of the
pushchair
(dia 10f) .
3. Using your pushchair as an infant pram
Birth to 9kg (or until your child can sit unaided)
Using the front swivel wheel locks
To lock the front swivel wheels into
the locked position, align front wheels
into a straight forward position and
slide the wheel lock guide up
(dia 7a) .
To unlock the front wheels, slide front
wheel lock guide down
(dia 7b) .
To use the pushchair brake
IMPORTANT – Parking brake is to be
used only when pushchair is stopped.
DO NOT apply the parking brake to a
moving pushchair.
IMPORTANT
– To prevent the
pushchair from moving, always use
the parking brake when loading/
unloading pushchair or making any
adjustments.
To lock rear wheels for parking or
loading pushchair, depress foot
brake
(dia 8a) .
To release brake, simply lift up the
foot brake to disengage brake from
rear wheel hubs
(dia 8b)
.
Open the bumper bar
(dia 3a and 3b)
.
Raise the calf support to the upright
position
(dia 10a and 10b) . Close the
bumper bar on the outside with the
calf support on the inside.
GB
IMPORTANT – Always use the brake pedal, as using the
connecting bar will cause it to bend.
7a
7b
8a
8b
9a 9b 9c
10a 10b
10c
Lower the backrest into the infant
pram position (lowest position)
(dia 10c)
by squeezing and pulling the
adjustment handle upwards
(dia 10d)
.
10d
10f 10e
10g