
M2118
Operating Manual
V1.06 © 17.10.2011 MOSTEC AG, CH-4410 Liestal
6
G. Fine-adjust the display/current output with the
programming buttons
The display and the current output can be changed without programming Software and PC.
1. Unlock the user menu / insert or modify the menu protection access code:
see B, page 3
2. Adjust the limit contacts:
1. Press and hold the button <ENTER> for 4 seconds.
ð
The display shows
SP_1
indicating the user menu.
2. Move to menu item d_Zo for display min. and or d_GA for display max. value,
or I_Zo for current output min. and I_GA for current output max. value
To move, use the button <+> or <->, then press <ENTER>.
ð
The display indicates the actual value of the limit contact.
3. Change the value, using the button <+> or <->, then press <ENTER>.
4. Press the button <ESC>
ð
the display shows the actual measuring value.
H. Fine-adjust the display with programming software
C
onnect the link cable with adapter to the computer and the display. (see I, page 6)
1. start "M
pro
"
2. Choose "M2118" in menu "Instrument" <A>
3. Choose "Adjust" for fine-adjusting the "Gain" or "Zero" <B>.
I. General references for using the programming software
-
The newest software may be downloaded any time and free of change at www.mostec.ch.
-
Connect the M2118 to the power supply for programming
-
Be sure that the connected COM-port isn`t used by any other peripherial device.
-
If the PC or the corresponding COM-port is "grounded" by the power line cable or by other cabeling, ground
loops may interfere with the measuring signal. The use of a computer with battery power is recommended to
avoid such problems.
-
Contact us if there are problems or questions concerning the software.
Non-liability
The company Mostec AG developed and tested the software "Mpro" with largest care. Mostec is not responsible for
any damages whatsoever, including loss of information, interruption of business, personal injury and/or any damage
or consequential damage without limitation, incurred before, during or after the use of our products.
<B
<A