Moss Europe Ltd.
Hampton Farm Industrial Estate
Hampton Road West, Hanworth Middlesex, TW13 6DB
In the UK: 020-8867-2020 FAX: 020-8867-2030
Moss Motors, Ltd.
440 Rutherford Street, Goleta, California 93117
In the US & Canada Toll Free (800) 667-7872
LOCAL (805) 681-3400 FAX (805) 692-2510
Although every effort has been made to ensure the accuracy and clarity of this information, any suggestions
that you may have that will improve the information (especially detailed installation notes and photos) are
welcome. These instructions were developed and written by Moss Technical Support. If you have any questions
or difficulties with your installation of this product, telephone 800-667-7872 between 7:00 a.m. and 4:00 p.m.,
Pacific Time for assistance.
Installation Instructions
Part # 910-891
-7-
Modified 01/17
9) Disconnect the windshield washer hose at the two
joints on top of the cowl. Figure 9.
Figure 9
10) Pull the bottom of the cowl towards the front of the
vehicle until the clips holding it to the firewall are free.
11) Move the cowl side to side while continuing to pull it
toward the front of the vehicle until it releases.
12) The cowl will now be free from the vehicle. Take hold
of the driver’s side cowl and lift up and to the outside
to separate it from the passenger’s side half.
13) Lift both sides of the cowl from the vehicle and put
them somewhere safe to be reinstalled later.
14) The cowl plate will now be visible. Remove the eight
10mm bolts securing it to the vehicle. Four of the
bolts will be on the very front of the firewall next to
the studs for the hard line removed earlier, and the
other four are located on top of the cowl plate.
Figure 14.
Figure 14
15) Lift the original cowl plate out of the vehicle. The hard
line can be pulled forward gently if it is in the way.
16) Install the new cowl reinforcement plate using the
same eight bolts that held the firewall plate in place.
17) Installation of all removed parts is the reverse of
removal.
18) Use the two included M8x1.25 flange nuts to secure
the rear of the strut brace.
