PRO-67-B V.2.S
57
1
1.768 X .120 X 48", SPLICE, BLACK
58
1
2" BOOM SECTION, BLACK/GREEN
59
1
1.768 X .120 X 24", SPLICE, GREEN
60
1
2" BOOM SECTION, GREEN
61
10
1/4-20 X 2-1/2" BOLT
62
10
1/4-20 LOCK WASHER
63
10
1/4-20 NUT
64
2
2" END CAPS
65
2
1-1/8" PLUGS
65A
2
1" PLUGS
66
2
#1021 SOLDER LUG
67
1
WARRANTY CARD
68
1
INSTRUCTION MANUAL
69
3
PENATROX
70
1
DEBURRING NOTICE
71
1
WARNING NOTICE
ASSEMBLY
< > Start by grouping all element sections and traps according to color code.
DEBURRING
< > MAKE SURE that before attempting to sleeve ANY of the pieces of tubing together you check to see that all tubing
pieces are DEBURRED!
In building the antenna we have removed the majority of the burrs, however, due to the number of pieces of tubing, the
cost of labor, the time consumption; some pieces may still have a few remaining burrs. Double check the pieces before
trying to put them together!
The tubing Mosley uses is made for us and the telescoping tolerances are very close. If you would try and force a piece
of tubing to sleeve, which is not deburred, it will SEIZE. If this would happen you aren’t going to get them apart.
This is a beautiful beam, we have put a lot of time and pride into it, take a few minutes and check the pieces.
NOTE: PENATROX, an anti-corrosion compound,
should be applied in a light layer
between coupled sections of
tubing to prevent formation of high resistance and seizing of aluminum.
4
