PRO-67-B V.2.S
ASSEMBLY OF MONO-PARASITIC
Assembly of the 10 Meter Reflector, color coded BLACK
< > Start with the BLACK coded elements. Refer to the drawings on this element..
< > Place inner elements into larger stiffener (Parts 46, 47, 48, 49) making sure screw holes are to the ground or bottom
side of the element.
< > Since these elements will be placed on inner sections of the boom, do not install the U-bolt and clamping block
(Parts 23, 24, 25, 26) until you have the element over the color-coded portion of the boom which applies to that color
coded element.
< > To keep the inner section of the element from moving, place a U-Bolt partially into the element center section at the
point where the element extension join at the center stiffener tube.
< > COMPLETE ADDING OUTER ELEMENT SECTIONS BEFORE PLACING ON THE BOOM. MAKE SURE SCREW
HOLES WILL BE POINTED DOWNWARD, THIS IS CONTROLLED BY THE CORRECT PLACEMENT OF PART 44
INTO PART 43. These parts are at the center of the element.
< > Secure element sections with #8 sheet metal screw.
< > Attach the plastic 3/4" end cap to end of the BLACK element..
Assembly of the 15 Meter Reflector, color coded
GREEN
< > Follow the same procedure which was used for assembling the black element. However, the Green element will
have one more piece of tubing extension.
< > Start assembly with the center stiffener and follow the GREEN color code.
< > Attach the plastic 5/8" end cap to the end of the element.
15
