Mosa SIP 4600B, Руководство пользователя

Страница: 79 / 129

M
OSA 4600B SIP Line user manual
77
In certain case, only input Phone Number and set IP/Port as 0.0.0.0/0 is possible. For example: If
the trunking gateway that makes Outbound-Transit call for MOSA 4600B to PSTN uses dynamic
IP, it increases the transfer speed of route information when the Phone No. of trunking gateway is
configured in Phone Book in advance if the dynamic IP of trunking gateway changed.
For Web configuration, please refer to
：
11.15 Phone Book
10.8.1.1 Add a Telephone Number
In the page of Web Management Page folder “ PHONEBOOK ”, under “Add Entry” :
(1)
Phone Number : Enter full telephone number including Country Code and Area Code, E.g.
886282268888
(2)
IP/Control Port : Enter the Static Global IP address and UDP port number. In certain case
above, input 0.0.0.0/0
(3)
Click button Apply
10.8.1.2 Delete a Telephone Number
In the page of Web Management Page folder “ PHONEBOOK ”, under “Delete Entry”, enter the
telephone number to be deleted in the field of “Phone Number” and click button Apply .
If you like to delete all static telephone number, please set “Delete All Static” to “Yes” and click
button
Apply .
10.8.1.3 Search the IP Address of a Telephone Number
You may search the IP address of a telephone number. The telephone number may be stored
either in static Phone Book or dynamic Phone Book ( through IP learning), hence you may find out
the corresponding IP address and UDP port number used when he telephone is placed. In
general, if the IP phone is failed, please search the IP address corresponding to the phone
number, then check the IP address of the other party to see if it is correct. You may also search
the phone number by entering NETMOSA ID.
In the page of Web Management Page folder “ PHONEBOOK ”, under “IP Search”, enter the
phone number, which IP you like to search, in the field of “Phone Number” and click Apply . Two
sets of IP address and UDP port will be displayed
IP1/Port : IP Address of Public IP and UDP port
IP2/Port : IP Address of Private IP and UDP port ( for IP Sharing). If private IP address is not
used, the same data as IP1/Port will be displayed.