Mosa SIP 4600B, Руководство пользователя

Страница: 64 / 129

62
Channels that need Caller ID authentication to join Entity, such as Entity 1.
Web Folder
：
Channel\Configuration
Web Folder
：
Channel\Configuration
And then, input Caller ID for authentication in individual Channel. For the example below, use
412260, then the caller ID authentication for that channel is 412260 and the channel join SIP
Entity 1 of this machine. System had been pre-configured 1010~1099 number (SIP URI) for
authentication and you can use it without change.
Attention : For Firmware 1.05 or above, if you activate this authentication, SIP URI (Caller ID)
must be consistent with the Username of SIP Inbound authentication . In other words, SIP URI
number is also used as
Username
of SIP Inbound authentication. For the description of
SIP
Inbound authentication, please refer to previous section.
Web Folder
：
Channel\Configuration
After above configuration, the incoming call to that Channel must come from SIP phone 412260
(Caller ID). If Caller ID of the incoming call is not 412260, then busy tone is heard, because only
412260 can make call to this Channel.
9.3 PIN code authentication (for Server Mode only)
Note : To simplify configuration, Firmware 1.06.2 or above does not provide this kinds of
authentication in Client mode, owing to rare use in practical case. Mis-configure the setting cause
connection fail.
By this authentication, user of SIP device has to dial extra PIN Code+# for authentication after
he/she make call to MOSA 4600B SIP Line. If authentication is successful, second dial tone is
heard. If PIN Code dialed is not correct or no PIN Code dialed, busy tone is heard.
For this authentication, function can be Enabled or Disabled for each SIP Entity. Use SIP Entity 1
as example. Select SIP Entity 1 first.
Web Folder
：
Advanced-SIP\Common