4
MORTUARY LIFT COMPANY (800) 628-8809
A. Place lag screws in three corners and tighten until
uniformly snug and firm.
B. Detach straps from screw hooks, tighten lag screw in the
fourth corner until the metal washer is firm against the
frame and does not rattle. A good method is to make this
adjustment while the motor is in operation. When in
perfect alignment the motor will run smoothly and
quietly.
C. Insert and tighten the center (2) lag screws until the
metal washer touches the frame and does not rattle.
Securing
Sample:
Suspended monorail track mount
on a wood joist ceiling mounted
perpendicular to the joists
