The Specialist In Drum Handling Equipment
MODEL 80i
Mobile-Karrier
Operator’s Manual for Model 80i Morse Mobile-Karrier
Serial Number 1114 to 0515 (MMYY)
Copyright 2015 - Morse Mfg. Co., Inc.
Form PL80i (1114-0515) (Updated April 29, 2015 1:02 PM)
5
Assembly Instructions
Please unpack and identify the following items:
Handle Assembly
Left and Right Stanchions
Saddle Assembly
Base Assembly
Hardware Bag 1578-P, Containing:
4 pc 1/2” washers, 807-P
2 pc 3/8-16 x 2-1/4” Hex Bolts, 82-P
2 pc 3/8-16 Lock Nuts, 1169-P
2 pc 1/2-13 x 3” Carriage Bolts, 806-P
2 pc 1/2-13 x 1-1/4” Carriage Bolts, 805-P
4 pc 1/2-13 Lock Nuts, 810-P
Slip stanchions into sockets on base
1.
and fasten with 3/8-16 x 2-1/4” bolts
and 3/8-16 lock nuts.
Attach handle to stanchions as shown
2.
using 3” carriage bolts. Run 1/2” lock
nuts on far enough to minimize play but
allow free pivot of handle.
Connect links and 1/2” washers inside
3.
handle ends. Note: two 1/2” washers
should be “sandwiched” between
each link and each handle end. Leave
nuts loose to allow links to pivot.
The three handle holes (on each side)
allow a trade-off between lifting effort
(leverage) and range of lift height. The
three holes in each link permit a choice
of starting or finishing lift heights.
