Copyright 2021 - Morse Mfg. Co., Inc.
Form PL285SX-NT (1219-____)
(Updated 5 May, 2021)
4
The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
Operating Instructions
Before sliding forklift forks into the fork tubes, adjust forks to an inside spread of 25.5” (64.8 cm) minimum. Lock forks into position on
1.
the forklift carriage.
Drive the forklift forward to slip the forks into the fork tubes. Tighten tee screws to secure the Forklift Karrier to the forks, or secure
2.
chain anchor between forklift cariage and Forklift-Karrier. Transport Forklift Karrier to drum to be handled.
Drive the forklift with the Forklift Karrier near floor level to position the saddle band around the middle of the drum between the ribs.
3.
Open the toggle clamp by activating the release lever and
4.
swing both hinge bands to the open position. Push the Forklift-
Karrier against the drum to surround the drum with the saddle
band.
Close the two hinged bands around the drum and latch the
5.
toggle clamp to secure the drum.
Raise forks to clear the floor and transport drum in vertical
6.
position to dispensing location.
While transporting, ensure that the drum is raised away from
7.
the floor to prevent the drum bottom from interfering with a
pallet or other obstacle.
Remove the drum by activating the release lever and opening
8.
the toggle clamp. Swing both hinged bands open. Drive the
forklift away from the drum.
Maintenance
Periodic inspection for the general condition of structural and mechanical components is imperative for safe and efficient operation.
Periodically inspect all moving parts, framework, drum holder and contact areas for signs of wear, fatigue, or loosening. Tighten,
•
adjust, or replace parts as necessary to prevent failure and maintain proper function.
Oil or grease all moving parts.
•
Worn or damaged parts must be properly replaced with the correct, genuine Morse parts.
•
