The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
Copyright 2021 - Morse Mfg. Co., Inc.
Form PL285SX-NT (1219-____)
(Updated 5 May, 2021)
3
Machine Description
The Model 285SX-NT Super-Duty Forklift-Karrier with NO Tilt is designed to lift and
transport a ribbed 55-gallon (210 liter) steel drum 22.5” (57 cm) in diameter. The maximum
full-drum capacity is 3000 Lb. (1361 kg).
Assembly Instructions
Prior to initial use, inspect all moving parts and saddle (drum holder) assembly.
1.
Perform necessary load test, inspections, operator training, etc.
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and
1.
take all necessary precautions. Safety shoes, work gloves, hard hat and other
personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new
2.
Morse drum handler.
The model 285SX-NT has a maximum capacity rating of 3000 Lb. (1361 kg)
3.
drum, and is designed to lift and move a 55-gallon (210 liter) steel drum. DO NOT
exceed these ratings. Exceeding these ratings or handling drums other than those
mentioned above is unsafe and could result in equipment damage, excessive wear
or awkward handling.
When loading, unloading, operating, or maintaining your MORSE drum handler,
4.
always use care and good judgment. Maintain secure footing and a firm hold.
Keep hands and loose clothing away from all moving parts. Never allow anyone to
be below any part of a raised drum handler or drum. Read operating instructions
and review the pictures in the sales brochure before operation.
Because the model 285SX-NT is a front-end attachment for a forklift, OSHA
5.
recommends that “… the truck (forklift) be marked to identify the attachment(s) and
show the approximate weight of the truck and attachment combination at maximum
elevation with load laterally centered.”
Net weight of Morse model 285SX-NT is 172 Lb. (78 kg).
Prior to initial use, inspect all moving parts and saddle (drum holder) assembly.
6.
Inspect saddle assembly for proper operation. Perform necessary load test,
inspections, operator training, etc.
