background image

The Specialist In Drum Handling Equipment

201 Series

Portable Drum Rollers

operator’s Manual for Morse 201 Series Portable Drum Rollers

Serial number 286584 to ______

morsedrum.com

Copyright 2019  -  Morse Mfg. Co., Inc. 

 

Form OM201 (286584-______) 

 

(Updated 22 Jul, 2020)

               

2

Safety Information

 (continued)

DAnGeR 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARnInG 

- Indicates a situation which, if not avoided, could result in serious injury or 

death.

CAUtIon 

- Indicates a situation which, if not avoided, can result in damage to the machine.

DAnGeR 

- Stay Clear of Rotating Drum. NEVER allow anyone to be near any part of the rotating 

drum.  Operator should remain clear of the Roller.

CAUtIon 

- Install Morse Rollers in accordance with OSHA requirements for enclosure and interlock, 

etc. For OSHA compliance, see OSHA subpart O.1910.212 “General Requirements for all Machines.” 

Power connections and motor controls must comply with applicable codes. 

 

A Morse safety enclosure with safety interlock can be ordered for any Morse drum rotator.

WARnInG 

- The 201 Series Drum Rollers are designed to handle one drum of the types listed at 

the top of page 3 under Machine Description.  DO NOT attempt to handle any other type of drum or 

object.  DO NOT exceed the weight capacity.

WARnInG 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to 

the Morse machinery without factory authorization.  Any modifications may void the warranty.  This 

machine was designed to perform a specific job and alterations may result in injury to operator or 

machine.

WARnInG 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate 

to the job.  Loose fitting clothing may become caught on the machinery and cause severe personal 

injury.

CAUtIon 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUtIon 

-  DO NOT allow drum to impact on floor, ground, etc.

WARnInG: 

This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to 

the State of California to cause birth defects or other reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

Содержание 201 Series






Отзывы: