8
www.morphyrichards.com
•
Hold down the attachment retainer
pin whilst fitting the attachments
J
.
•
Align the flats of the shaft end to
approximately the same angle as
that of the drive and insert into the
drive
J
.
•
Rotate the attachment slightly until it
locates to the drive and push into
place.
•
Release the attachment retainer pin
and rotate the attachment slightly
until the hole on the attachment
locates to the retainer pin on the
main unit drive hub
K
.
•
Tighten the securing collar as much
as possible. The best way to do this
is to hold the feed tube with one
hand and the spanner in the other
hand and turn clockwise
L
.
NOTE: it may be necessary to
tighten this collar again during use.
•
Fit the food tray into the food throat
and locate the tray underneath the
outlet to catch processed food
M
.
Operating Instructions
•
The fine mincer screen is for raw and
cooked meat, fish and small nuts.
•
The coarse mincer screen is for raw
meat, fish, nuts, vegetables, hard
cheese, fruit peel and dried fruit.
•
Fit the appropriate screen as
described above in assembly
instructions.
•
Cut the meat and vegetables into
cubes of 25mm maximum.
•
Feed the cubed food into the feed
tube.
•
Use the pusher to move the food
down the tube, no pressure is
required at all.
•
Operate the machine on Speed 4.
K
L
M
48955MCZamended 9/1/07 4:32 pm Page 8
