background image

4

Pour the coffee into cups and gently
pour or preferably spoon the milk onto
the coffee, then sprinkle a little chocolate
powder. Turn off the milk frother hot plate
by pressing the neon on/off switch. 

Warning: the stainless steel jug and

the hotplate will remain hot for sometime
after switching off.

The milk frother blade can be removed

for easy cleaning by unscrewing the blade
and wash carefully in hot soapy water. It is
recommended that you remove the blade
immediately after use, as dried milk can be
difficult to remove. To replace insert the
stem of the milk frother blade into the
mounting hole on the unit and screw into
place.

There may be some splash back of milk

on the underside of the frothing unit. Switch
the unit off then simply wipe this area clean
with a damp cloth.

5

The anti-drip valve will prevent any
remaining coffee dripping onto the hot
plate. Ensure that the jug is replaced on
the hot plate after serving. While the
coffee maker is switched ON the hot
plate will keep the coffee warm.

6

Switch off the coffee maker when the jug
is empty or the coffee is no longer
required.

WARNING: The coffee maker and hot
plates are hot and remain hot for
some time after switching off.

7

Allow unit to cool.

8

Remove the permanent mesh filter and
empty the used coffee grounds. Wash
the filter immediately and dry thoroughly.
NOTE: THE MESH WILL BECOME
DISCOLOURED AFTER A WHILE DUE
TO THE STAINING EFFECT OF
COFFEE.

Refilling

1

Switch off the coffee maker and allow 3
minutes to cool before refilling with cold
water.

Locating the filter

1

To remove the filter, slide the locking tab
on the removable filter holder to the
unlock position and and lift both the
holder and mesh filter out to clean. (see
cleaning)

2

To refit, place the removable filter holder
into the top of your coffee maker, making
sure the tab lines up with the rib then
slide the locking tab to the lock position.
Place the permanent mesh filter inside
the filter holder by lining up the locating
tab with the groove in the filter holder as
shown.

Locking
tab

Rib

5

47002 Rev 1   3/6/03  2.02 PM  Page 6

Содержание IB47002









Отзывы: