RELAY DRIVER
10
3.2 Assign Functions
Each of the four channels is assigned a Function, which
switches channel(s) on/off based on criteria. Some Functions
only control one channel while others manage two or more
channels as a group.
The Relay Driver Setup screen, shown in Figure 3 is the
starting point from which each channel is setup. The upper left
area of the window displays the four channels and the
corresponding configurations.
Each of the four (4) channels has a configuration summary that
shows which Function is assigned as well as a few key
parameters.
Next to each channel Configuration Summary are two setup
buttons labeled
Simple
and
Advanced
.
Simple
setup allows the
user to modify the most essential settings while using factory
default values for the more advanced settings.
Advanced
setup
allows the user to specify all parameters including control
address, sample rate, defaults states, and more.
NOTE: We recommend using Simple setup unless
there is a specific need to modify an Advanced
parameter.
The four buttons located in the bottom right corner are defined
as follows:
Write to File
- allows the user to save a configuration for later
use.
Read from File
- retrieve past configurations saved to file
