Morita Lubrina 2, Инструкция по эксплуатации

Страница: 12 / 48

10
5 Parts Identification and Function
Instructions for Use 2019-04-22
█ Indicator Lamps
Power Lamp
Operation Lamp
Completion Lamp
Line Selection Lamps
Lubrication Mode Selection Lamps Empty Spray Can Lamps
Power Lamp
This lights up when the Power Switch is
turned on.
Lubrication Mode Selection Lamps
The corresponding lamps will light up
based on the selected lines.
Completion Lamp
This lights up when handpiece lubrication is
completed.
Operation Lamp
This lights up when handpiece lubrication
is in progress.
Line Selection Lamps
Each lamp lights up when the correspond-
ing line is selected. When performing the
lubrication, the corresponding line lamp will
blink.
When the front door opens during opera-
tion, all the line lamps will light up.
Empty Spray Can Lamps
Each lamp blinks if the corresponding line’s air pres -
sure does not reach the rated value.
p.12 “6.1.2 Air Tube”
Each lamp blinks when the corresponding spray can
becomes empty during operation.
p.16 “6.2.2 Spray Cans”
Each lamp lights up when any abnormalities occur in
the lubrication lines.
p.33 “9 Troubleshooting”