34
9 Troubleshooting
Instructions for Use 2020-01-21
Symptoms
Possible Causes
Remedies
Ref.
Page
Oil mist is released.
Installation surfaces get
oily.
Handpiece shape
Depending on the shape of the handpiece, it will
likely scatter more oil during the maintenance and
will increase excess oil on the handpiece after the
maintenance. Reduce the air pressure to 0.3 MPa.
p. 12
Handpiece is attached in an improper direc-
tion.
Set the handpiece direction correctly.
Air pressure setting is too high.
Adjust the regulator and set the pressure within
the specified range.
p. 12
No bur inserted in straight attachment.
Refer to the user’s manual that comes with the
handpiece. (For some handpieces, oil mist may be
released if a bur is not inserted.)
N/A
Empty Spray Can Lamp
stays on.
Something is wrong with oil supply lines inside
the device. If the lamp still lights up even after
performing maintenance again, have the device
repaired.
N/A
