Morgana Plockmatic BM 60, Руководство по обслуживанию

Страница: 18 / 37

17
REP 3.11 HOME POSITION KNIFE MOTOR M2
Purpose
Switch SW8 stops the Knife motor at home position.
Remove Front and Infeed cover, according to CRI 2.1 and 2.2.
Select folding on front panel.
Run one set of paper trough and check that the Fold knife stops below the pa-
per path according to the drawing.
WARNING: This adjustment is performed with power ON, make sure to stay
clear from moving parts.
1.
2.
3.
Adjustment
Locate Switch SW8 positioned on side frame operator side.
Manually turn the shaft of the folding knife motor until the folding knife is in the
lowest position.
Loosen the two screws (1).
Position SW8 so that the gap is 0.5 - 2.0 mm and tighten the two screws.
WARNING: This adjustment is performed with power ON, make sure to stay
clear from moving parts.
1.
2.
3.
Paper path middle section
Paper path lower section
Fold knife motor M2
Fold knife
1
SW8
Fold knife motor M2
Fold knife