Morgana Plockmatic BM 60, Руководство по обслуживанию

Страница: 14 / 37

13
REP 3.7 POSITIONING STAPLES ON FOLD
Purpose
The distance between the fold stop and the fold knife should be equal to the dis-
tance between the fold knife and the staple outlet. Regardless of where the fold is
positioned the staples should always be on the fold.
Run a few sets of two sheets and check the position of the staples. 1.
Adjustment
Remove the nut (1).
Position the Fold plate by turning the set screw (2), clockwise will increase the
length between the Fold stop and the Fold knife.
NOTE: The Fold plate should be in an approximately 90° angle compared to
the fixed part of the Fold stop. It is not recommended to do a large adjustment
on the set screw. If a large adjustment is needed, loosen the screws (3) on both
sides of Fold stop and go to REP 3.5 for adjustment.
1.
2.
NOTE: If the angle is larger than 90° the stapler position will vary and the book
quality will be poor.
OK
1
2
3
Fold plate
90º