Page 39
Page 38
DocuFold Pro
Error Screens
Sheet did not arrive.
If the machine stops and error message 01 is displayed on the touch screen, this
indicates that the paper did not arrive at the end of the suck process; so the machine
timed out. Press the green tick button and then press the start button.
Overlap
If the machine stops and error message 13 is displayed on the touch screen, this
indicates that the ‘Lead Edge Sensor’ has seen a sheet subsequent to the first
one as being longer. Again this could actually be a longer sheet, OR it could be a
sensor problem (if it is a recurring problem). Check that the paper gate has been set
correctly.
Upper fold plate set out of range.
If the touchscreen shows the error screen shown below, this indicates that the fold
that has been set for the upper fold plate is out of range.
Error Screens (continued)
Lower fold plate set out of range.
If the touchscreen shows the error screen shown below, this indicates that the fold
that has been set for the lower fold plate is out of range.
Incorrect fold plate fitted for perforating or scoring (without folding).
If the touchscreen shows the error screen shown below, this indicates that the wrong
fold plate is fitted. When perforating or scoring (without folding) the
short fold plate
must be fitted in the upper slot position.
Incorrect fold plate fitted for perforating or scoring (with folding).
If the touchscreen shows the error screen shown below, this indicates that the wrong
fold plate is fitted. When perforating or scoring (with folding) the
long fold plate
must be fitted in the upper slot position.
