Page 13
Page 12
Operating the DocuFold Pro
Operating the DocuFold Pro
TOUCHSCREEN OPERATION
1. Turn the Emergency Stop button clockwise to switch the power on. After the
system start up procedure the touch screen will be displayed as shown below.
WARNING:-
Wait at least 10 seconds, after making any selection on the Touchscreen
panel, before switching the machine OFF. Failure to do so could result in the
data storage being corrupted, and the machine not operating.
The touch screen is laid out into 3 main areas as shown below:
IMPORTANT.
If you have not been trained to operate this machine, we strongly advise that you select
the red cross icon.
We recommend that you either seek training or ask a trained operator to run the machine
for you.
Select the green tick icon only if you have been trained to operate this machine.
If you have not been trained to operate this machine and you select the green tick icon,
Morgana Systems Ltd accept no responsibility for personal injury, damage to the
machine or damage to materials being processed by the machine.
Delivery Roller
Emergency Stop Switch (S)
This switch also serves as the main isolator.
It is important that the machine is switched off at
the end of the days running, press this switch to isolate the machine.
To switch back on,
rotate the switch head clockwise.
The delivery roller will adjust automatically according to the paper length and the fold type selected.
Manual or fine adjustment for the position of the delivery roller can be made as shown on Page 19.
You should adjust the roller position so that when the work is stopped by the delivery roller, it
lies flat on the delivery without lying on the sloping plate, (See Diagram below), and without the
green belts showing between the sloping plate and the folded sheet.
Overlap
The machine has a built in system that will detect any sheet that overlaps another sheet by at
least 20mm. When this happens feeding will stop and the main switch will switch off,
preventing serious jams. The error screen (shown below) will be displayed on the touchscreen..
Note that this is not a double detector and will not detect all double sheet feeds. However the
overlap system is an indication of a tendency to double sheet feed and therefore the paper gate
should be lowered slightly and the paper stack should be fanned out more thoroughly.
Sloping plate
DocuFold Pro
Status of
machine &
data entry
area. Also
used for
quick links
to setting
pages.
Tabs to enable switching between setting
pages
-
choose either Paper
Settings, Fold
Settings, Delivery Setting, Store or Tools
Setting
page
