Morgana BM 2000, Руководство оператора

Страница: 28 / 59

27
2. Making Booklets
Edge staple
Select [Edge staple] when you want to make edge
stapled sets. Press the [Enter] button to confirm.
Note
Finished sets will be delivered to the Trim Bin in the
Trimmer.
Saddle staple
Select [Saddle staple] when you want make saddle
stapled booklets.
Staple position and fold line can be adjusted both
individually and together. If adjustment is needed,
see Staple and Fold Alignment below. Otherwise,
press the [Enter] button to confirm.
If the booklets exiting the system do not have the
staples centred on the fold, or if stapling position is
desired on the top or bottom of the spine, that can be
adjusted from the control panel.
With Fold correction highlighted, press [+] or [-] to
move staple positioning on the spine. Press the
[Enter] button to confirm.
Note
This adjustment can also be done during booklet
making.
If the booklet fold line is not in the centre of the sheet,
or if it is desirable to move the fold line to match the
print, that can be adjusted from the control panel.
Contrary to the above situation, this adjustment
moves both the staple and fold together.
With Staple Fold Pos highlighted, press [+] or [-] to
move the staple and fold line position. Press the
[Enter] button to confirm.
Staple and fold Alignment