1. Press POWER button to power on machine.
– Machine will be in standby mode.
– The machine will enter FUZZY mode if there is no water inside the tub.
– Press START/PAUSE button, Select PROGRAM and then HEAVY. The machine will enter FUZZY
mode and sense the laundry load automatically to set the water level.
– The machine will not be in FUZZY mode if there is water inside the inner tub.
2. Press PROGRAM to select desired program.
3. PRESS PROCESS to begin process selection.
Note: Pressing PROCESS button continuously will repeat the process cycle again.
4. Select desired water level according to laundry load.
5. Press HOT DRY TIME button to select heat drying time.
6. At the beginning of START, press DELAY button if required to select delay time, which will be
displayed on the screen indicating time to complete the wash process.
7. To cancel DELAY, press POWER button for machine to enter STANDBY mode.
8. To select "Air Dry" at the beginning of operation, press PROGRAM button to select AIR DRY. The
machine will be in standby mode when air dry function is completed.
9. Close the top lid, press START/PAUSE to begin operation.
10.The buzzer will sound & power will automatically cut-off after operation is completed.
11.It is recommended to select STANDARD program for normal wash at full load to conserve water.
Pressing PROCESS PROGRAM APPLICATION LIGHTING INDICATOR
Button No. of Times
0 Wash, Rinse & Spin Standard Program Wash, Rinse & Spin lights
are lit
1 Soak, Wash Rinse & For soiled laundry Soak, Wash, Rinse & Spin
Spin lights are lit
2 Wash Adding detergent Wash light is lit
repeatedly
3 Wash, Rinse No spinning to avoid Wash & Rinse lights are lit
creasing
4 Rinse & Spin Hand Wash, Rinse & Rinse & Spin lights are lit
Spin
5 Spin Hand Wash & Spin Spin light is lit
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
15
14
• Do not heat dry laundry stained by food, oil, animal oil, machinery oil, solvent, petrol,
benzene, thinner, alcohol and etc., as these may ignite and pose a fire hazard.
• Do not place flammable materials into the inner tub.
• Do not place machine near flammable sources of oil, petrol, benzene, thinner,
alcohol & so forth as these may pose a fire hazard.
• Do not heat dry cushions as the materials inside them may leak, cause chemical
reaction or may be flammable.
• Do not wash, rinse, spin & heat dry waterproof materials as they may damage the
machine.
• Please refer to page 16 for heat dryable clothing list.
• Spin clothes well before heat drying.
• Lay laundry loosely piece by piece into the inner tub before heat drying.
• Upon completion of heat drying, clean air vents from any obstructions such as dirt, dust, paper to
ensure drying efficiency.
• Water condensation may occur during heat drying. It is recommended to open the inner tub lid and
allow tub to ventilate upon completion.
• Do not insert clothing into the inner tub when heat drying is in progress.
• Ensure inner tub lid is closed when heat drying.
•
CAUTION:
Exercise caution when removing clothing after heat drying. Do not touch the walls of the
inner tub as it is still hot!
HEAT DRY CAPACITY & DRYING TIME
Capacity & Drying Time
Fabric Type (according to material, thickness & weight)
± 1.0KG
(±120 minutes)
Towel x 2 pcs
(100% cotton/±70g)
± 2.0KG
(±240 minutes)
± 3.0KG
(±300 minutes)
HEAT DRYING FUNCTION & NOTES
WARNING 1
WARNING 2
Underwear x 2 pcs
(100% cotton/±50g)
Undergarment x 2 pcs
(100% cotton/±130g)
Suit/Shirt x 1 pc
(Blend/±20g)
Stockings x 4 pairs
(100% cotton/±50g)
Bath Towel x 2 pcs
(100% cotton/±300g)
Work Suit x 1 set
(Blend/±800g)
Bath Towel x 2 pcs
(100% cotton/±300g)
