OTHER FUNCTION
19
18
OTHER FUNCTION
SPECIFICATIONS
1. WHEN ALARM GOES OFF
FAULT CODE DISPLAY POSSIBLE CAUSES SOLUTION
E0 Top lid opened when Delay is started. Close top lid & clear fault code.
E1 Water does not drain within 5 minutes. Ensure drain hose is laid down. Open
top lid, follow troubleshooting guide,
close top lid & clear fault code.
E2 Top lid opened during spin function. Close top lid & clear fault code
E3 Imbalanced spin. Open top lid, loosen laundry to balance
weight. Close top lid & clear fault code.
E4 Water level does not reach preset level Open top lid, follow troubleshooting
even after 50 minutes. guide, close top lid & clear fault code.
E5 Top lid still open after deactivating Close top lid & clear fault code.
(Child lock light flashes child lock.
synchronously)
E6 Water level exceeds overflow level. Drain water until water level reaches the
maximum water level mark.
E7 Abnormal input & output memory. Close top lid & clear fault code.
EA Heat drying when inner tub is filled with Heat dry after spin.
water.
EB Heat drying exceeds rated weight Open top lid & remove some clothing.
F1 Water sensor malfunction Power off, detach power plug from
power supply & contact authorized
service agent.
2. IMBALANCE ADJUSTMENT
• During spinning, violent vibrations may happen if laundry is not placed equally in the tub. This machine
has an automatic imbalance adjustment function. Once vibration exceeds beyond a specified level,
the adjustment system will start automatically to adjust the imbalance.
3. POWER SUPPLY IS CUT OFF AUTOMATICALLY
• If START/PAUSE button is not pressed within 10 minutes after pressing the POWER button, power
supply will cut off automatically.
• Power supply will cut off automatically after washing is completed.
Model MWM-11 Sapphire
Rated Voltage / Frequency 220-240V~ 50Hz
Washing Power 410W
Spinning Power 330W
Capacity 11.0kg
Weight Approx. 36.5kg
Dimension (mm) 584W x 621D x 978H
4. CHILD LOCK FUNCTION
All buttons including POWER will be locked.
• If top lid is open during operation, machine will stop and sound an alarm.
• If top lid is closed within 5 seconds, the machine operation will resume & fault code will be cleared.
• If top lid is not closed within 5 seconds, DRAIN process will begin if there is water in the inner tub &
closing the top lid will not deactivate this process.
• During draining, an alarm will sound once every 10 seconds.
• When water in inner tub is 5cm higher, an alarm will sound once every 10 minutes.
• When draining completes, the machine will be in waiting mode.
• If top lid is closed, the machine will resume operation as in previous setting.
Once child lock is activated & top lid is opened for over 5 seconds during WASH or
RINSE (with water inside inner tub) – DRAIN function will activate & alarm will
sound. If child lock function is deactivated during DRAIN, water will be added
automatically to reach preset level and resume operation.
