PROCESS BUTTON
• Press PROCESS button to select either cycles from “wash-rinse-spin”, “soak-wash-rinse-spin”,
“wash”, “wash-rinse”, “rinse-spin”, “spin”.The default cycle is “wash-rinse-spin” after pressing START.
PROGRAM BUTTON
• Normal:
For general wash
• Heavy:
For jeans & heavy clothes
• Quick Wash:
For speedier general wash
• Soft:
For delicate clothes
• Standard:
Standard wash
• Child:
Delicate was for children’s clothes
• Dry Clean:
Removes odour & bacteria
• Hot Dry:
Separate drying for wet clothes
HOT DRY BUTTON
• Press “hot dry time” button to heat dry according to the following cycles: 30 points, 60 points, 120
points & 180 points.
DISPLAY SCREEN
• Under delay & before wash, display shows DELAY time in HOURS.
• During wash, display will show process time in MINUTES.
• In the event of a malfunction, display will show trouble code.
• On START with fuzzy logic activated, display will show “- -“.
MODE & INDICATOR LIGHTS
ON:
indicate selected mode
FLASHING:
indicate the program is in operation. Under DELAY function before operation the digital
timer shows delay time, unit is HOUR.
POWER BUTTON
• Press POWER button to turn on power. Press again to turn power off.
• The machine will power off automatically if START/PAUSE button is not pressed 10 minutes after
powering on.
START/PAUSE BUTTON
• Press START/PAUSE button to begin operation.
• Press START/PAUSE during operation to pause the machine. Press START/PAUSE to resume
operation after pause.
WATER LEVEL BUTTON
• Digital timer will display “- -“ if fuzzy logic is activated but water level is not selected. Select NORMAL
or HEAVY to activate fuzzy logic, STANDARD to deactivate with water level at “6”. QUICK WASH will
deactivate fuzzy logic & water level will be “2”.
• After pressing START/PAUSE, press “Water Level” to select desired water level without fuzzy logic.
Select water level according to laundry load: 1-2 for low, 3-5 for middle, and 6-8 for high water level.
• During wash (including rinse), press water level button to add water. Release button to stop.
• During wash (including rinse), press START/PAUSE & press water level button to select higher water
level. Press START/PAUSE again to resume operation & water will automatically fill to the preset
level.
DELAY BUTTON
• After pressing START, press DELAY button to select preset time from 2 – 24 hours.
• Press POWER button to cancel preset timer & enter default state.
CONTROL PANEL & FEATURES
CONTROL PANEL & FEATURES
13
12
