Moretti SKEMAFORM Rugy PM100X, Инструкция по эксплуатации

Страница: 37 / 76

13
ENGLISH
10.5 Accessory use of the PMA210 electric pedal control kit
Fig.12 Fig.13
Fig. 12 - Electric pedal control to activate the chair head lift
Fig. 13 - Electric pedal control to activate the elevation and lowering of the chair
The two models of electric foot controls differ only in the function they activate
1. To lift, press the arrow at the top (of the headboard or of the entire chair) with the foot
2. To lower, press the down arrow (on the head or the whole armchair) with the foot
11. MAINTENANCE
The SKEMA devices by MORETTI are checked carefully and supplied with EC mark, once
launched on the market. For the safety of the patient and the doctor we recommend to check
the suitability of your product at least once a year.
For periodic inspection we refer to the check of the following parts:
• The supporting structure of the armchair, of the leg and backrest movement mechanisms and
of the lifting mechanism with the relative attachments, controls, safety devices
• Check installation , integrity and operation of the castors and their brake
• Check the integrity of cables and plugs
• Check all welding points
If a repair is needed, please use only approved parts and accessories. If damage is found during
inspection or maintenance, immediately put it out service the product until repaired or replaced
12. CLEANING AND DISINFECTION
12.1 Cleaning
Use a damp cloth and mild soap. Then dry thoroughly before use Use water at a temperature
not exceeding 30° C. Do not to use washing machines jet of water and steam.
12.2 Disinfezione
If you need to disinfect the device use a common disinfectant cleaner.
NOTE:
Never use acids, alkalis or solvents such as acetone
13. CONDITIONS OF DISPOSAL
13.1 General conditions of disposal
In case of disposal don’t use the inserting container for municipal waste. We recommend to
dispose the beds in the appropriate disposal areas for recycling.