Moretti SKEMAFORM Rugy PM100X, Инструкция по эксплуатации

Страница: 33 / 76

9
ENGLISH
remote control to one of the inputs of one of the two ‘female’ sockets just fixed.
Then connect the connectors of the 2 pedal controls to the other two free female sockets.
See fig.5 for a suggestion for the installation.
Fig.5
9. WARNINGS FOR USE
• Before making any adjustments to the chair, make sure it is in position stable on the legs
• Before carrying out any cleaning, maintenance or simply moving the chair disconnect
the mains voltage plug
• Do not use additional mobile multiple sockets or extension cables
•
Do not connect any electrical device to the chair that is not intended for normal use of the chair
• Do not move the chair with patients on board
• Before seating the patient, check that the brakes are applied and the castors locked
ATTENTION!
Do not sit with your weight resting entirely on the back section or section
leg as the maximum load declared for the bed is to be understood as “uniformly
distributed on its support surface”; otherwise the frame structure could be seriously
damaged. Moretti Spa declines any responsibility on damage resulting from improper
use and / or use different from that indicated in this manual of use.
10. MODE OF USE
10.1 Chair use and handling - for all models
When used with patients, the chair must always be locked by activating the brakes of the 4
wheels provided by means of the appropriate lever. When it is necessary to move it or When it
needs to be moved or handled, the brakes on each wheel can be released (see fig.6)
Fig.6
Before each use connect the electrical power cord to the 220 vac power outlet.
Use the supplied remote control to adjust the height of the bed and the inclination of the back
and leg sections as well as the trendelenburg angle. (see figs. 7 e 8).