MOREL PERFORMANCE SERIES AMPLIFIERS / Owner’s Manual
MOREL PERFORMANCE SERIES AMPLIFIERS / Owner’s Manual
3
2
We thank you for choosing Morel amplifiers to complement your car audio system. The
new MPS amplifiers were developed with the same passion and innovative philosophy
that is driving all of Morel’s product development. The MPS amplifiers are musical,
dynamic, with clean, uncolored power that can drive speakers to their full sonic potential.
It is very important to carefully read this manual to ensure safe and optimal operation
of the amplifier. We highly recommend to have a professional installer integrate the
amp into the sound system. There are many parameters that needs to be taken into
consideration when installing an amplifier to safeguard that the car’s electrical system is
not compromised in any way and the sound system is tuned properly.
PRACTICE SAFE SOUND!
Studies have shown that continuous exposure to high sound pressure levels from high
power audio systems can lead to permanent hearing loss. Additionally, high volume levels
can obscure noises from outside your vehicle such as emergency vehicles and horns.
As a valued Morel customer, we urge you to use common sense and practice restraint in
the operation of this product.
Serial Number:
PACKAGE CONTENT
(1) MPS amplifier
(1) 2mm hex wrench
(1) 2.5mm hex wrench
(1) 3mm hex wrench
(4) Mounting screws
(1) User manual
(2) Top panel replacement screws
AVAILABLE ACCESSORIES
MPS-R1
subwoofer remote level control (works with MPS 1.550 and MPS 5.950 only)
MPS-HL
high-low level adaptor with 50-ohm load resistor
PRECAUTION
The MPS amplifiers are designed to work with a 12V DC electrical system with negative
to ground. Use of this product in vehicles with positive ground and/or voltages other than
12V may result in damage to the product and/or vehicle and will void the warranty.
PLEASE MAKE SURE TO CAREFULLY READ AND UNDERSTAND
ALL INSTRUCTIONS PRIOR TO INSTALLATION
SERIAL NUMBER
Please take the time to enter the serial number in the space provided below.
The serial number can be found on the bottom panel of the amplifier and on the amplifier
packaging. This is required in the event that your amplifier requires warranty service and
may be helpful in recovering your amplifier in case of a theft. Be sure to store you this
manual in a safe location.
All Morel MPS amplifiers comply with CE and EMC regulations.
