34
© 2017 Maka Technologies Group. All Rights Reserved.
Getting
Started
Operation of your TX1 FHD Digital Roadcorder
TM
Anti-Shaking
1 Press
OK to stop recording.
2. Press
once to enter into video setting
3 Press on
Up
or
Down
button to navigate to the function that shows
Anti-
Shaking
4 Press on
OK to enter and show
:
Off/ On
5 Press on the
Up
or
Down
button to make your selection
6 Press on
OK
to confirm your entry and exit to setting
7 Press on
button once t
o exit Setting and back recording mode
8 Start recording by pressing
OK
button
9 Stop recording by pressing
OK
button again
Note ; This function is only used on photo taking and not
applicable to video recording.
Delay Shutdown
This function will allow the device to shut down after the set timer when the
engine is off
1 Press
OK to stop recording.
2. Press
once to enter into video setting
3 Press on
Up
or
Down
button to navigate to the function that shows
Delay Shutdown
4 Press on
OK to enter and show
: 15sec/30sec/1min/5min
5 Press on the
Up
or
Down
button to make your selection